中文|English

C80Y Hot stamping machine

  • Product information
  • Machine parameter
  • Function & structure
    Feeding unit
    1.Taiwan feeder with 4 suction cups for lifting & 4 suction cups for transfering ensures stable and fast paper feeding.
    2.Preload device, non-stop feeding function, with Max pile height up to 1400 mm
    3.Rail-guided preload device enables operators to move the prepared pile to the feeder accurately and conveniently.
    4.Side layers can be shifted from pull layers to push layers to fit different formats.
    5.Side and front layers are equipped with precise location aligning photocells with adjustable sensitivity.
    6.Paper feeding will slow down when the paper is about to reach front lays to achieve a more accurate paper orientation.
    7.German stainless steel brings you a smooth and quick paper conveyance.  
     Die-cutting & hot stamping unit
    1.Synchronous longitudinal & transversal foil feeding enables foil stamping at both direction, which reduces foil using and shorten replacing time.
    2.Optional longitudinal axles can reach to 6 at most, which are controlled by Japan Yaskawa servomotor.
    3.Operator-friendly retractable foil holders are suitable for foil with maximum diameter 250mm.
    4.Both longitudinal & transversal blowers for paper stripping are available for facilitating big format foil stamping.
    5.Human–computer interaction screen ensures a quick setting of foil feeding interval.
    6.The machine alarms when the foil is shorter than 6 meters and the diplay shows the foil length left.
    7.Cutting force is controlled by Japan Fuji servo motor to achieve accurate and stable die cutting controlling through touch screen. The cutting force adjustment is accurate to 0.01mm.
    8.The chase and die cutting plate are automatically locked by SMC pneumatic cylinder; comparing to manual locking, this ensures much faster and sfter operation.
    9.Centerline registering installation system of the chase ensures a convenient and fast assembly of cutting die.
    10.By using special auxiliary tools, cutting dies of different sizes can be adopted to meet different task needs.
    11.Grippers are structured in an adjustable type to ensure accurate paper registering.
     Delivery unit
    1. Alternating current motor controlled delivery brake helps collect and align the paper.
    2.You can also control each unit of the machine by using the 10.4’ touch screen at delivery unit.
    3.Auxiliary delivery rack ensures non-stop delivery;
    4.Servomotor controlled rear layers are applicable for paper with different sizes.
    5.Synchronous belt is wear resistant and of long service life.     

     Machine parameter
     
      Sheet size 800*760mm (MAX.)
    297*300mm  (MIN.)
      Max.die cutting size 785*585mm
      Gripper margin 7-17mm
      Max.die cutting force 150 TON
      Paper size GSM Card Board:90~2000g/m2 
      Corrugated Paper:≤4mm; 
      Max. die-cutting speed 7500 SHEET/HOUR
      Max. stamping speed 6500 SHEETS/HOUR
      Max. hologram stamping speed 5500 SHEETS/HOUR
      Heating zone 20 heating zones, temperature 20°-200°
      Max. pile height at feeder 1400mm
      Max. pile height at delivery 1150mm
      Main motor power 7.5kw
      Total power 35kw
      Weight  13 TON
      Overall dimension 5670*3900*2370mm
      Max. longitudinal foil diameter Φ250mm
      Air source 0.5~0.8MPa;600L/min

     Function & structure
           
     No.  Item  Config.  Brand manufacturer
     Feeder unit
    1 Stream Feeding Method  Supplied  
    2 Vacuum Conveyer Table  Optional  
    3 Feeder Head   Supplied Taiwan Yongchuan
    4 Feeder Head   Optional Germany MABEG
    5 Non Stop Feeding Device  Supplied  
    6 Side & Front Layer Photocell  Supplied  
    7 Anti-Obstacle Device   Supplied  
    8 Vacuum Pump  Supplied  Germany BECKER
    9 Control Panel at Feeder  Supplied  
    10 Convertible Pull/push Layer   Supplied  
    11 Double Sheet Detection  Optional  
    12 Static eliminator  Optional Germany Kersten
    Die cutting  unit
    1 Pneumatic Lock System  Supplied Japan SMC Cylinder
    2 Centerline Registration System  Supplied  
    3 Gripper  Supplied Janpan
    4 Pre-extended Chain  Supplied Germany
    5 Air Seperating Device  Supplied
    6 Computerized Foil Monitoring  Supplied  
    7 20 Independent Heating Zones    Supplied  Germany
    8 Hologram Device  Optional  
    9 Foil Break Detector  Optional
    10 6-roller Foil Rewinder  Optional  
    11 3 Longitudinal& 2 Transversal Axles  Supplied Japan Yaskawa
    12 Torque Restrainer  Supplied Imported components
    13 Cutting Plate Pneumatic Lift  Supplied
    14 Auto Lubrication and Cooling  Supplied  
    15 Auto China Lubrication  Supplied  
    16 Main Drive Inverter Control Supplied  Siemens/Schneider
    17 Ductile Iron Honey Comb Chase  Supplied
    18 Auto Force Releasing Supplied  Japan Yaskawa
     Delivery unit
    1 Non-Stop Delivery  Supplied  
    2 Back Layer Orientation  Supplied Japan Yaskawa
    3 Electrical Depressor Brush  Supplied  
    Electric control unit
    1 Superior Electrical Components  Supplied Muller/Omron/Schneider
    2 CE Certificate  Supplied  Germany PILZ module
    3 15'/10.4'Touch Screen   Supplied SHARP

Top